1. Lay transparent electrode on two supports as shown in picture. The supports can be books, or other non-metal objects.

2. Place camera under the transparent electrode, facing up, and focused on the glass. You may place a mirror under the glass electrode, at a 45 degree angle to see the image without taking a picture if you wish.

3. Place a flat-bottomed glass or plastic vial with water inside on transparent electrode. It does not have to be a transparent vial. Place the end of a short, thin wire into the liquid.

4. Connect the green ground wire to the black ground jack on the CV6000. Connect the alligator clip to the small wire in the vial.

5. You may now turn on the CV6000 to see the coronal discharge.